Kodak 6B8773 User Manual
Page 212

C-4
April 28, 2004
Troubleshooting
Image contrast is wrong in the
Image LCD.
Adjust using the Display Contrast feature (see
Exposure is off.
Capture a test image, use the histogram (see
) and zoom to 1:1 (see
view luminometer readings and determine if
exposure adjustments (aperture, shutter speed,
ISO) are necessary.
Exposure Meter icon blinks in
the Top Status LCD.
The Exposure setting is out of
range.
Choose an appropriate exposure value (see
).
Shutter Speed display shows
"Err" in the Top Status LCD.
Lens aperture reset switch is
defective.
Replace or repair lens.
Main mirror is out of sequence
with camera firmware.
Turn the camera off, then on.
The Top Status LCD does not light
up.
Battery is exhausted.
).
Autofocus does not work.
The Focus Mode switch on the
lens is set to M.
Set the Focus Mode switch on the lens to AF
(see
The lens is not properly
mounted.
Mount the lens correctly (see
).
Difficulty seeing images on the
Image LCD
Image LCD is dirty.
Clean the Image LCD (see
).
Image LCD is worn out.
Contact your camera dealer.
No image appears on the external
video monitor.
Video cable is not inserted
correctly
Insert the video cable correctly (see
Problem
Cause
Remedy