Serial data collection, Connecting a device to the serial port, Serial data collection -1 – Kodak 6B8773 User Manual
Page 195: Connecting a device to the serial port -1

April 28, 2004
15-1
15
Serial Data Collection and
Global Positioning System
The Serial port is used to exchange data with a variety of other digital
products.
The following Serial Port settings are available:
• Serial In
• Serial Out
• Baud Rate
NOTE: All Serial Port settings persist across power cycles.
Serial Data Collection
Connecting a Device to
the Serial Port
Use the Serial Port for connecting all devices except GPS units. See
for instructions on connecting and using GPS units.
1. Connect the appropriate end of the serial cable to the Serial port on
your camera.
2. Connect the other end of the cable to the device.
NOTE: Your dealer has a compatible KODAK serial cable (catalog number
1157619).
See also other documents in the category Kodak Cameras:
- LS753 (64 pages)
- LS753 (73 pages)
- DX7590 (82 pages)
- CX7220 (72 pages)
- CX7220 (60 pages)
- C533 EN (67 pages)
- CX7330 (61 pages)
- LS443 (122 pages)
- Z760 (91 pages)
- Z760 (79 pages)
- DX3900 (105 pages)
- Z700 (78 pages)
- CD40 (79 pages)
- Z7590 (118 pages)
- Z7590 (104 pages)
- Z612 (101 pages)
- Z612 (90 pages)
- DC3400 (156 pages)
- CX4200 (106 pages)
- Z650 (94 pages)
- Z650 (77 pages)
- DX7440 (67 pages)
- LS755 (83 pages)
- LS755 (80 pages)
- V610 (106 pages)
- V610 (87 pages)
- Z740 (70 pages)
- CX7530 (83 pages)
- CX7530 (66 pages)
- CX7530 (67 pages)
- CX7525 (83 pages)
- CX7525 (66 pages)
- V530 (95 pages)
- V530 (73 pages)
- C643 (83 pages)
- EASYSHARE C603 (72 pages)
- C340 (83 pages)
- C340 (74 pages)
- EasyShare C340 (74 pages)
- V603 (91 pages)
- V603 (76 pages)
- DX3500 (92 pages)
- C663 (85 pages)
- EasyShare C663 (74 pages)
- Z730 (79 pages)