Click balance, Click balance -3, Using the current image for click balance -3 – Kodak 6B8773 User Manual
Page 133

Controlling Exposure
April 28, 2004
7-3
Click Balance
Click Balance takes RGB values from the current image or from previously
saved or loaded settings and applies them to subsequently captured
images.
NOTE: The Click Balance feature is only available for Raw files. It is not
available for JPEG files.
Using the Current Image for
Click Balance
1. Select a Raw image.
2. Choose White Balance from the Capture menu, choose Click Balance
then highlight Image and press the OK button.
The selected image appears.
3. Press any side of the Five-way control to move the eyedropper over a
neutral (gray) area of the image.
4. Press the OK button.
The pixel values in the area under the eyedropper are sampled.
See also other documents in the category Kodak Cameras:
- LS753 (64 pages)
- LS753 (73 pages)
- DX7590 (82 pages)
- CX7220 (72 pages)
- CX7220 (60 pages)
- C533 EN (67 pages)
- CX7330 (61 pages)
- LS443 (122 pages)
- Z760 (91 pages)
- Z760 (79 pages)
- DX3900 (105 pages)
- Z700 (78 pages)
- CD40 (79 pages)
- Z7590 (118 pages)
- Z7590 (104 pages)
- Z612 (101 pages)
- Z612 (90 pages)
- DC3400 (156 pages)
- CX4200 (106 pages)
- Z650 (94 pages)
- Z650 (77 pages)
- DX7440 (67 pages)
- LS755 (83 pages)
- LS755 (80 pages)
- V610 (106 pages)
- V610 (87 pages)
- Z740 (70 pages)
- CX7530 (83 pages)
- CX7530 (66 pages)
- CX7530 (67 pages)
- CX7525 (83 pages)
- CX7525 (66 pages)
- V530 (95 pages)
- V530 (73 pages)
- C643 (83 pages)
- EASYSHARE C603 (72 pages)
- C340 (83 pages)
- C340 (74 pages)
- EasyShare C340 (74 pages)
- V603 (91 pages)
- V603 (76 pages)
- DX3500 (92 pages)
- C663 (85 pages)
- EasyShare C663 (74 pages)
- Z730 (79 pages)