Kodak 6B8773 - Manual (Page 41)

About Your Camera
April 28, 2004 2-19
Removing the Lens
• Press the Lens Release button and turn the lens counterclockwise until
it stops. Gently remove the lens from the camera body.
NOTE: On the mount surface of the lens, there are a number of electric
contacts. Keep them clean to ensure proper connection. To avoid
damaging them, put on the lens’ rear cap when the lens is off the
camera.
Imager
Light from the scene you are photographing strikes the imager when the
camera’s shutter is open. The imager converts this light into a digital image.
Your camera has an approximately 14 million pixel imager with an ISO
range of 160 - 1600 (Raw files) or 160 - 800 (JPEG files).
Shutter Button
The Shutter button has two positions. When you lightly press the Shutter
button, the camera's Autofocus and Exposure Systems activate. When you
then press the button all the way down, the shutter releases to capture an
image.
NOTE: Before you start to take pictures, you should become familiar with
the light press position.