Kyocera X-tc M2000 - Manual (Page 72)

64 Call options
Call options
Voice dialing
Use the following features to customize the voice
commands.
Enable Automatic Add
From
^мнзг~нбЕ=~ЗЗ , select bе~ДдЙЗ to
automatically add a contact to your voice dial list
when you create a new contact.
Set Expert Mode
Use
bñéÉêí=гзЗЙ to speak a command after you
hear a tone instead of following the initial voice
prompts.
From
bñéÉêí=гзЗЙ , select one of the following:
• kçêã~ä sets the phone to default voice
prompts.
• bñéÉêí sets the phone to sound tones instead
of voice prompts.
Set Display Results
You can set the phone to display up to three voice
recognition contacts when calling or searching
for a contact with voice commands.
From
aáëéä~у=кЙлмднл , select páåÖäÉ=ДЙлн or
qÜêÉÉ=ДЙлн .
Set Digit Lengths
You can set the number of digits used for a phone
number in your voice dial list.
From aáÖáí=дЙеЦнЬл , select one of the following
options:
•
kçêíÜ=~гЙкбЕ~е recognizes only 7, 10, and 1
+ 10 digits in a phone number.
• mÉêãáí=~ää allows 4-14 digits in a phone
number.
Voice answer
Enable Voice Answer
You can set your phone to answer a call with your
voice when using a hands-free accessory.
1.
From ^мнз=~елпЙк , select aбл~ДдЙЗ .
2. From eЙ~ЗлЙн=лзмеЗ , select lмн=зС=
ЬЙ~ЗлЙн .
3. From sçáÅÉ=~елпЙк , select táíÜ=
~ЕЕЙллзку .
Answer Using Voice Answer
When you receive an incoming call, the phone
prompts “Incoming call, answer?”. With the caller
recognized as a contact entry in your phone, the
phone prompts “Incoming call from (Name),
answer?” Do one of the following:
• Say “Yes” or press any except the
båÇ key to
answer the call.
• Say “No” or press the båÇ key to ignore the
call.
• Remain silent. The voice alert repeats twice
and the phone rings once before returning to
the main screen.