Kyocera X-tc M2000 - Manual (Page 66)

58 Bluetooth
Disconnect from a Device
From
jу=ЗЙобЕЙл , highlight a connected device
and select aáëÅçååÉÅí .
Rename a Device
1.
From jу=ЗЙобЕЙл , highlight a device.
2. Select léíáçåë=[=oЙе~гЙ .
3. Enter a new name and select p~îÉ .
Delete a Device
You can delete a Bluetooth device that you have
paired your phone with.
1.
From jу=ЗЙобЕЙл , highlight a device.
2. Select léíáçåë=[=aÉäÉíÉ=[=vÉë .
View Device Services
A Bluetooth device paired with your phone may
have more than one service profile (such as
Headset, Handsfree, and so on). Do the following
to check the services available:
1.
From jу=ЗЙобЕЙл , highlight a device.
2. Select léíáçåë=[=pÉêîáÅÉë .
3. At the service list, highlight a profile and
select
`зееЙЕн to change the active profile.
Change Bluetooth Settings
Turn on or off Bluetooth
You must turn on your phone’s Bluetooth feature
to use it with Bluetooth devices.
From
pÉííáåÖë , select låLlÑÑ and one of the
following:
• lå allows other devices to find your phone.
• lÑÑ prohibits your phone from being used
with any Bluetooth wireless technology device.
To prolong battery life, it is recommended to
turn off Bluetooth when you are not using it.
When you turn on Bluetooth the first time, you
need to find your device before pairing with it.
Visibility
Use this setting to control your phone’s Bluetooth
visibility to other Bluetooth devices.
From
pÉííáåÖë , select sáëáÄáäáíó and one of the
following options:
•
eáÇÇÉå hides your phone from being used
with other Bluetooth devices.
• sáëáÄäÉ=Ñçê=P=ãáå allows other devices three
minutes to find your phone.
• ^дп~ул=облбДдЙ always allows other devices to
find your phone.
Change Phone’s Name
You can change the name presented for other
Bluetooth devices’ search of your phone.
1.
From pÉííáåÖë , select aÉîáÅÉ=е~гЙ .
2. Enter a new name and select p~îÉ .
View Supported Services
From
pÉííáåÖë , select aÉîáÅÉ=беСз to view a list
of the Bluetooth service profiles your phone
supports.