KORG XTENDED DEFINITION D32XD - Manual (Page 21)

11
Introduction
Before using the D32XD/
D16XD for the first time
Main features
Parts and their function
Items and functions in the
TouchView display
Basic operation
automation turned on, the stored scenes will be recalled and changed automati-
cally. You can also edit scenes by rearranging, renaming, or deleting them. (
→p.52,
148)
27 MARK key
This key allows you to register a specific time location in a song as a mark, so
that it can be instantly recalled. Up to 100 such marks can be stored per song
This key is also used to edit marks by renaming or deleting them etc. (
→p.39,
148)
28 SCRUB key
Access the Scrub page. Use the value dial to control the selected function.
(
→p.40, 148)
29 LOC1/IN, LOC2/OUT, ...LOC6 key
These keys are used to register a specific time location within a song, or to
instantly jump to a registered time location.
The time locations registered here can be used as the punch-in/out locations,
and to specify the editing range for track editing operations such as copy or
delete. (
→p.38, 149)
30 MARK JUMP √ ® keys
Use these keys to step through the time locations registered as marks.
31 REC/PLAY MODE key
Use this key to select the recording mode, and also to turn loop playback on/off.
32 LOOP, TRIGGER, AUTO PUNCH indicators
These indicators will light to show which operation - loop record/playback, trig-
ger recording, or auto punch recording - was selected using the REC/PLAY
MODE
key above.
33 Transport keys
Use the REC, PLAY, STOP, REW, and FF keys to perform playback or recording
operations on the recorder. (
→p.151)
34 HDD/CD access and MIDI indicators
The HDD/CD indicator will light to indicate that the hard drive is being
accessed for recording, playback or editing, or when the CD-R/RW drive is
operating. The MIDI indicator will light when MIDI messages are received from
the MIDI IN connector.
Never subject the D32XD/D16XD to vibration or impact while this HDD/CD indicator is lit.
35 ON key, standby indicator
This key switches the D32XD/D16XD between the ON and STANDBY modes.
When the standby indicator is lit, pressing the ON key will turn the D32XD/
D16XD on.
When the D32XD/D16XD is operating, hold down the ON key to access the
Power Off
dialog box.
36 Cursor key
These keys move the cursor allowing you to highlight or select items in the dis-
play.
37 +, – keys
These keys edit the value of the selected parameter as an alternative to using the
value dial
. These keys are convenient when you want to adjust a value in single
increments.
Parts and their function