KORG XTENDED DEFINITION D32XD - Manual (Page 150)

140
5a. Track selection
Press the popup button, press a radio button in the
Select Track
dialog box to select the track whose loca-
tion you want to specify, and press the OK button.
If you press (highlight) the Stereo button, the wave-
forms of two adjacent channels will be displayed in
the upper and lower parts of the waveform window.
5b. Preview playback buttons
5c. Search Zero
You can press this button and turn the value dial to
move to the next or previous zero-cross point.
A “zero cross” point is a point where the waveform level
crosses the ±0 amplitude (the center line in the waveform
window).
5d. Waveform window
This displays the waveform of the selected track.
5e. Locate
Use the radio buttons to select the location (IN, OUT,
TO, END) you want to edit, and turn the value dial to
set the location while you listen to the track audio
(soloed). The current location is shown by the vertical
bar in the waveform window.
5f. ZOOM
Use these buttons to adjust the size of the waveform
display and the playback speed.
When you press the OK button, the locations you speci-
fied will be overwritten to the corresponding key (LOC1/
IN
, LOC2/OUT, LOC3/TO, LOC4/END). If you press the
Cancel button, your changes will be discarded.
InsertTrk
This operation inserts a blank in the IN–OUT range of the in-
sert destination track (Destination).
When this is executed (Exec.), any track data that followed
the inserted blank will be shifted toward the end of the song.
A1. Destination D32XD [1...32, ML, MR, 1-2...31-32,
MST, 1-4...29-32, 1-8...24-32,
1-16, 17-32, 1-32, ALL]
D16XD [1...16, ML, MR, 1-2...15-16, MST,
1-4...13-16, 1-8...9-16, 1-16, ALL]
Select the insert destination track.
For a 96 kHz/24-bit song, you can choose only up to tracks 1–
8.
For D32XD 48 kHz/24-bit or 44.1 kHz/24-bit songs, only
tracks 1-16 can be selected.
A2. Wave
This area displays the audio data of the track as a wave-
form. Here you can set the editing locations (IN, OUT)
more precisely. (
→p.139 Edit Type: “CopyTrk,” Wave dia-
log box)
EraseTrk
This operation erases the track data in the IN–OUT range of
the erase destination track (Destination).
When this is executed (Exec.), the IN–OUT range will contain
silence.
A1. Destination D32XD [1...32, ML, MR, 1-2...31-32,
MST, 1-4...29-32, 1-8...24-32,
1-16, 17-32, 1-32, ALL]
D16XD [1...16, ML, MR, 1-2...15-16, MST,
1-4...13-16, 1-8...9-16, 1-16, ALL]
Select the erase destination track.
For a 96 kHz/24-bit song, you can choose only up to tracks 1–
8.
stops playback
plays approximately two seconds from the location
(“Play From”)
plays approximately two seconds ending at the lo-
cation (“Play To”)
plays the location (from In to Out)
plays as a loop
vertically expands the waveform display.
vertically shrinks the waveform display.
horizontally expands the waveform display.
horizontally shrinks the waveform display.
D32XD
D16XD
IN OUT
Blank
DestTrack
DestTrack
A1
A2
IN OUT
Blank
DestTrack
DestTrack
A1
A2