KORG XTENDED DEFINITION D32XD - Manual (Page 131)

121
Reference
Counter Rename
METER
CH
VIEW
MIXER
EFFECT
CD
SYSTEM
MIDI/ SYNC
TEMPO
SONG
TRACK
UNDO
STORE
SCENE
MARK
SCRUB
LOC1/IN
...LOC6
ENTER
MARK JUMP
REC/PLAY
MODE
Transport
keys
4-6. Final EFF
The final effect is used to make final adjustments to the over-
all sound in the last stage of the master bus. Here you can use
one stereo effect program.
You can use the control knobs located below the LCD screen
to edit the parameters displayed as knob icons.
1. Effect program selection
To select an effect program, use the value dial, or press
the popup button in the screen and choose from the list of
effect programs displayed by category.
If the selected program has been edited, the program
number’s P (preset), U (user), or S (song) indication will
change to “E,” indicating that the program has been
edited.
2. Trim knob [0…100]
With a setting of 100, the level will be the same as the
input level.
If distortion is caused by an excessively high input level
when you apply the effect, use this parameter to lower
the input level.
3. Effect chain display
This shows the chain of effects that make up the effect
program.
4. Control knob icons
Use these to edit the parameters of each effect.
For details, refer to “4-3. Insert EFF” (
→p.119), 7. Control
knob icons.
5. ON/OFF
This is an on/off switch for the selected effect within the
effect chain.
If the button is OFF, that effect will be bypassed.
6. Level meter
This shows the input/output level of the effect and the
GR (gain reduction) level.
7. Rename
Use this to rename an effect program.
For details, refer to “4-3. Insert EFF” (
→p.119), 10.
Rename.
8. Store
Use this to store the effect program whose parameters or
name you have edited.
For details, refer to “4-3. Insert EFF” (
→p.119), 11. Store.
D16XD
4-1. Effect Routing
This lists the effect programs used by the insert 1–8, master,
and final effects, and shows their status.
The D32XD/D16XD lets you use up to eight insert effects,
two master effects, and one final simultaneously.
The number of simultaneously usable effects will differ depending
on the size of the effect programs, and on how they are assigned.
In this screen you can also select effect programs and edit
some of their parameters.
To select a program, use the value dial or press the Select
button in the screen and choose from a list of effect programs
by category.
For details on the parameters and value, refer to D32XD “4-
1. Routing A”.
Effects that can be used simultaneously
The effect programs used by the D32XD/D16XD’s effects are
classified as being different “sizes” according to the amount
of DSP processing power they consume.
Effect programs that allow up to eight insert effects to be
used are called “size-one” effects. Relative to these, some ef-
fect programs are “size-two” and others are “size-four.”
The size of an effect program is shown by the icon at the right
of the effect name.
One “size” corresponds to one of the on/off icons in each ef-
fect cell.
In the case of a 44.1 kHz/48 kHz song, a maximum of sixteen
“sizes” worth of effects can be used simultaneously.
In the case of a 96 kHz/24-bit song, a maximum of eight “siz-
es” worth of effects can be used simultaneously, due to the
increased amount of calculating power that must be con-
sumed for effect processing.
Techniques for assigning effects
On the D32XD/D16XD, effects assigned to the upper rows of
effect cells will be given higher priority for being turned on.
This means that depending on how programs are assigned,
you may need to use the Restrct button or the On/Off but-
tons to make adjustments while watching the DSP Power in-
dicator, in order to make the best use of the available effects.
The priority order also applies to the groupings of Insert, Master,
and Final effect. For example if you assign a size-four program to
insert effect 7, this will occupy insert effects 7 and 8 and master
effect 1, meaning that you will not be able to assign a program to
master effect 1.
To cancel an effect, cancel its channel assignment, and also select
NO EFFECT as the effect.
1
2
4
5
6
7
8
3
1
2
3
4
5
6
7
8
9
10
EFFECT