KORG XTENDED DEFINITION D32XD - Manual (Page 17)

7
Introduction
Before using the D32XD/
D16XD for the first time
Main features
Parts and their function
Items and functions in the
TouchView display
Basic operation
Parts and their function
Top panel
1 INPUT 1, INPUT 2...INPUT 8 jacks
Connect mic or line sources (such as keyboards) to these input jacks.
Both XLR jacks and balanced 1/4" TRS phone jacks are provided.
You may also connect unbalanced phone plugs to the 1/4" jacks.
Each XLR jack can provide +48V phantom power for condenser mics. The
LED located below each XLR jack will light if phantom power is switched on
for that jack.
The optional 8-channel analog input board (AIB-8) can be installed to add INPUT 9–16 using
balanced 1/4" TRS phone jacks (unbalanced phone plugs may also be connected).
If you insert a plug into a TRS phone jack, no signal can be input from the corresponding XLR
jack. If you want to use an XLR jack, do not connect the corresponding TRS phone jack.
1
2
3
4
5
6
7
8
9
14
15
16 17
18
19
20
D16XD
D16XD 5
6
7
9
13
11
12
10
11
12
13
18
19
20
21
Phantom power LED
2: HOT
1: GND
3: COLD
GND COLD HOT GND HOT
Balanced phone plug Unbalanced phone plug
Parts and their function
Main features