To take full advantage of the D32XD/D16XD’s functions, and to enjoy trouble-
free use, please read this manual carefully and use this product only as directed.
Keep this manual in a safe place for future reference.

Included items

Make sure that the following included items are present.

Before using the D32XD/D16XD for the first time

Please observe the following points when using the D32XD/D16XD.

Power on/off

The D32XD/D16XD is a precision instrument, similar to a personal computer,
equipped with an internal hard disk drive and a CD-R/RW drive. When turning
the power on and off, follow the procedures shown below.

Before you turn on the power, make sure that the power cable is firmly plugged into the
D32XD/D16XD and into an AC outlet.

● Power-on

(1) Lower the D32XD/D16XD’s MONITOR LEVEL knob to the

–

∞ position. Set the volume controls of your external equip-

ment to their lowest position.

(2) Turn on the power of external input devices such as key-

boards that are sending audio to the D32XD/D16XD.

(3) Turn on the main power switch (POWER ON) located on the

rear panel of the D32XD/D16XD.
The STANDBY indicator will light. The D32XD/D16XD is now
in the “standby” condition.

(4) Press the power (ON) key located on the top panel to turn

the D32XD/D16XD on.
The opening screen will appear in the LCD, and then the
“SelectSong”

tab page of SONG page mode will appear.

The next time you turn the power on, the song that been
selected prior to the previous power-off will be selected.

(5) Turn on the power of your external output devices, such as

the monitor system to which the D32XD/D16XD is send-
ing audio.

If the power is turned off accidentally while the D32XD/D16XD is being
used, the D32XD/D16XD itself or its internal hard disk drive may be
damaged.

● Power-off

(1) Lower the D32XD/D16XD’s MONITOR LEVEL knob to the –

∞ position.

(2) Turn off any devices connected to the D32XD/D16XD’s outputs, such as

your monitor system.

• Owner’s Manual (this document)

• Power cable

Important

(1)

(3)

(4)

STANDBY
indicator

The opening screen when the optional AIB-8,
ACB-8, and DIB-8 are installed (D32XD)

This manual is related to the following products:

XTENDED DEFINITION D16XD