Siemens Gigaset 3000 - Manual (Page 77)

77
Appendix
Before contacting the Service department, you should
attempt to correct any errors yourself:
Troubleshooting
Error Possible cause Remedy
No display. Handset not
switched on.
Battery empty. Press the on/off
key.
Charge battery or
replace with spare
>!'!-!*))N
is
displayed as soon
as you press the
talk key.
No dial tone; no
calls can be made.
Hicom cordless E is
being used by other
users. Try again later.
No radio connec-
tion possible to
base station,
-!
flashes.
The handset is out-
side the radio
range of the base
stations; radio sig-
nal too weak.
The handset is not
registered.
Excessive delay
between synchro-
nisation attempts. Move into radio
range, change
location.
Log on the hand-
set.
Switch off handset
and switch it back
on again.
-! is dis-
played,
forexample,but no
incoming or outgo-
ing calls can be re-
ceived or made.
Activation/deacti-
vation not possible.
The handset is
blocked. Open the battery
compartment lid
(arrow) and close it
again.