Siemens Gigaset 3000 - Manual (Page 54)

54
Bases
If your handset is logged onto more than one base (sys-
tems*), you can set it to a particular base or "best base" for
automatic base changeover during cross-network roaming
(in conjunction with "ISDN Config").
* See also note on page 24
Selecting the base
Press the menu key.
<
Scroll to
-!?!)#-
.
= Confirm the selection.
<
Scroll to the required base, for exam-
ple,
-!
.
N Press the display key.
<
Scroll to
?!'!
.
= Confirm the selection.
The activated base is indicated by a
check mark.
\ Use the display key to jump to the next
menu level up.
Note:
● If you set
!--!
, the handset is always automati-
cally connected to the base with the best reception.
● If you are located between two systems for example,
and the handset switches continuously, you should set
it to a particular system.
● The "ISDN Config" function should always be activated
as a basic setting, see page 25.
-!?!)#-
-!
?!'!