Siemens Gigaset 3000 - Manual (Page 68)

68
Query number
The call number of the calling party is stored if you are
outside of the radio range, the handset is switched off or you
do not accept a call (handset is not busy and is on standby).
You can query the stored numbers in the handset and sub-
sequently dial these numbers or delete them.
Prerequisite: only internal calls, or external calls with
transferred call numbers are stored.
The last five or first five calls are stored. This depends on
the Hicom cordless E system settings. The "oldest" call is
automatically deleted by subsequent calls if the last five calls
are stored. The calls must be deleted individually by the
handset user if the first five calls are deleted.
+ Press the display key.
<
Scroll to =A>E;N
= Press the display key to confirm selec-
tion.
e.g. A list of numbers is shown on the dis-
play.
The last entry appears at the top.
A check mark behind an entry means
that a callback has already been at-
tempted.
<
e.g. Scroll to the desired number, e.g.
HG .
N Press the display key to confirm selec-
tion.
e.g. Display: name, date and time.
< Scroll to one of the following functions:
7: : Dial number
:@ : Delete entry
;D@S<>B7A? : Display next/previ-
ous entry.
= Press the display key to confirm selec-
tion.
The selected function is executed.
=A>E;
H
HG
✓
HG
?47@6
GNGNH
7:
:@
;D@
<>B7A?