Preparing the handset, Inserting the batteries into the handset – Siemens Gigaset 3000 User Manual
Page 11
11
Preparing the handset
●
Hold the handset with the dialling keypad facing down-
wards, see Fig 2. A battery compartment for 2 batteries is
located in the lower part of the handset.
●
To open the battery compartment, press the grooves and
slide the lid downwards in the direction of the arrow, see
Fig 2. Lift off the lid.
●
Insert the 2 batteries supplied into the battery compart-
ment, as shown in Fig 2.
Ensure that the batteries are inserted according to cor-
rect polarity.This is indicated in the battery compartment.
●
Position the lid at a distance of approx. 3 millimetres from
the battery compartment, see Fig 2.
Slide the lid of the battery compartment upwards until it
slots into place.
Inserting the batteries into the handset
Note:
●
Please read the safety notes first, see page 2.
●
Only use supplied or approved batteries. Do not use
normal (non-rechargeable) batteries, see page 13.
●
Always change the batteries at the same time and only
insert batteries of the same type and produced by the
same manufacturer.
Fig 2
Inserting the batteries