Siemens Gigaset 3000 - Manual (Page 24)

24
Logging handsets onto a telephone system
* DECT = Digital Enhanced Cordless Telecommunications
<
e.g. e.g.
select
-!H
.
N Open the submenu.
<
Scroll to
>!#-!,
.
= Press the display key to confirm selec-
tion.
An input prompt appears.
e.g. ... Enter the system PIN (max. 8 digits).
= Confirm the entry with the display key.
If logon has been successful,
-!H
is displayed, with intermediate display
of the ring symbol
.
Note:
● To ensure that the handset/telephone used to "open"
the logon window can be used again immediately:
press
j and enter the code no. digits, e.g. #24.
● Base/system: For Hicom cordless E, the handsets are
not logged on at the stations (base stations) but at the
telephone system. In this case, Base on the display
always refers to the DECT system.
*
● The "ISDN Config" function should always be activated
as a basic setting.
-!H
>!#-!,
)!,-!* !
-!H