Siemens Gigaset 3000 - Manual (Page 10)

10
Introduction
● Depending on the environment, the range in the open is
up to 300 m per base station.
● In buildings, the range extends up to 50 m per base sta-
tion (depending on the room and building layout and con-
struction).
● If you leave the radio range of the system’s base stations
during a call, the quality of the voice connection drops,
particularly if you move. For a better voice connection,
move back into the base station range.
● The radio connection is lost if you exceed the range. This
is identified by the flashing of
-!
, for example.
● The field strength is displayed in the first display line by
the
symbol when the phone is idle.
● Please consult your system administrator in the case of
range problems.
● Integrated power saving function: If you leave the base
station radio range when the handset is switched on, the
interval between synchronisation attempts gradually
increases – this increases the battery life in standby
mode.
To ensure that the handset can be used as soon as you
return to the radio network, you should immediately regis-
ter it again:
Press the on-hook key until the display is blank, press the
on-hook key again until the handset is on.
● If you intend to leave the radio network and take your
handset with you, we recommend that you turn the hand-
set off in order to save the battery.
To clean the handset and the charging shell, simply wipe
them with a damp or antistatic cloth. Never use a dry cloth
(this produces static charge). Do not use abrasive cleaning
agents.
Radiorange
Leaving the radio network
Cleaning the handset