Siemens Gigaset 3000 - Manual (Page 46)

46
Audio settings
The following audio settings are all activated and deacti-
vated using the same principle:
– Beep (for note, see page 47)
– key beeps
– batt. low beep
– confirmation beep
The "key beeps" function is used by way of example here to
describe setting procedures:
Press the display keys to set the re-
quired volume.
You can select one of five ringer vol-
umes, the crescendo ring (= C) or no
ringer tone (= 0).
= Confirm the setting.
\ Use the display key to jump to the next
menu level up.
Note:
● The symbol appears in the first display line if you
have deactivated the ringer (level 0).
● A call pickup is signalled by a short ringer tone if the
handset is part of a call pickup group. Ringer tones 1-5
are, therefore, recommended in a call pickup group.
Activating/deactivating audio settings
Press the menu key.
?!)#-
is displayed.
= Confirm the selection.
<
Scroll to ?*.) ?!)#- .
= Confirm the selection.
<
Scroll to
9!2!!-
.
= Confirm the selection.
The activated function is indicated by
a check mark symbol.
&
?!)#-
?*.) ?!)#-
9!2!!-