Siemens 54 - Manual (Page 35)

33
Deinstalling the Gigaset USB Adapter 54
Gigaset USB Adapter 54 / englisch / A31008-M1071-R101-1-7619 / deinstallation.fm / 04.12.2006
Deinstalling the Gigaset USB Adapter 54
You may have to deinstall the Gigaset USB Adapter 54:
u If an error occurred during installation.
u The Gigaset USB Adapter 54 is not working properly and the problem cannot be
rectified (see Chapter "Fault tracing" on page 42).
u You have acquired a newer version of Gigaset USB Adapter 54, and the operating
instructions of the new device recommends deinstalling the older version.
u You no longer need the Gigaset USB Adapter 54 and want to free up space on the
hard disk and working memory.
Deinstallation involves the following steps:
1. First deinstall the software for the Gigaset USB Adapter 54.
2. Then deinstall the hardware.
3. Complete deinstallation.
Deinstalling the software
To deinstall the software for the Gigaset USB Adapter 54 from your PC:
ì Close all running programs.
ì Select Start – Programs – Gigaset USB Adapter 54 – Deinstall Gigaset USB
Adapter 54.
You will see a warning message.
ì Confirm the prompt with OK.
The software and all the drivers will now be removed from your PC.
ì Do not restart your PC until you have also removed the hardware.
Completing deinstallation
ì Remove the USB cable from the PC's USB socket.
ì Follow the remaining instructions and then restart your PC.
Note:
If you restart the PC before removing the Gigaset USB Adapter 54 USB cable,
Windows will automatically start its hardware recognition program. If this happens,
close automatic hardware recognition by clicking on Cancel.