Siemens 54 User Manual
Page 16
14
Installing the Gigaset USB Adapter 54
Gigaset USB Adapter 54 / englisch / A31008-M1071-R101-1-7619 / installation.fm / 04.12.2006
The following properties are shown:
u
SSID (Service Set Identifier) in the Connection line
u
the transmission rate (in Mbps) in the Speed line
u
the transmission quality (in %) in the Link quality line
If there is no connection, you will see a red ball over the icon and in QuickInfo,
Disconnected is displayed.
Reading the connection quality from the icon
The icon changes gradually depending on the current connection quality. The better the
connection quality, the higher the transmission speed.
With reasonable to poor connection:
ì
If possible, move your PC closer to the connection partner for greater field strength.
No WLAN available (red cross over bar)
There is no WLAN within range of your Gigaset USB Adapter 54 that you
could connect to.
ì
Check the configuration of the access point and adjust the Gigaset USB
Adapter 54 settings accordingly.
OR
ì
Change your location to reduce the distance to a connection partner.