Siemens 54 - Manual (Page 29)

27
Configuring the Gigaset USB Adapter 54
Gigaset USB Adapter 54 / englisch / A31008-M1071-R101-1-7619 / configuration.fm / 04.12.2006
Status
The Status tab provides information about the status of the wireless network your PC is
connected to via the network adapter:
u The left-hand pane shows the valid settings for the active configuration profile.
u The right and lower pane shows the statistics for the past data transfer.
SSID Shows the ID of the network environment
(see "SSID (Service Set Identifier)" on page 18).
Network Mode Shows the structure of the network environment
(see "Network Mode" on page 19).
Transmission Rate Shows the current transmission rate in Mbps .
Channel Shows the channel used for radio transmission
(see "Channel" on page 19).
Transmission Mode Shows the WLAN standard used for data transmission
(see "Transmission Mode" on page 19).
Authentication Shows the authentication standard.
Security Shows the encryption method
(see "Configuration – Security" on page 20).
Received Packets Shows how many data packets have been received on your PC
from connection partners on the current WLAN since the
connection was set up.