Siemens 54 - Manual (Page 33)

31
Configuring the Gigaset USB Adapter 54
Gigaset USB Adapter 54 / englisch / A31008-M1071-R101-1-7619 / configuration.fm / 04.12.2006
The list shows the following parameters for each connection partner:
Establishing a connection
ì Double-click in the list on the connection partner with which you want to set up a
connection.
This connects your PC to the connection partner.
SSID Shows the connection partner's ID
(see "SSID (Service Set Identifier)" on page 18).
BSSID (MAC Address) Shows the connection partner's physical address (Basic Service
Set Identifier).
In networks with Infrastructure mode, the BSSID corresponds
to the MAC address of the access point.
Channel Shows the radio channel the connection partner uses to transmit
data (see "Channel" on page 19).
Security Shows whether radio traffic to the connection partner is
encrypted (see "Configuration – Security" on page 20).
If this is the case, you will see a key icon.
Signal Shows the signal strength of the radio traffic between your PC
and the connection partner as a percentage (see "Status" on
page 27).
Transmission Mode Shows the connection partner's current transmission mode
(see "Transmission Mode" on page 19).
Network Mode Shows the connection partner's current network mode
(see "Network Mode" on page 19).
Note:
If your network adapter's active configuration profile is not compatible with the
connection partner's settings, you will first see the Configuration – Common tab.
ì Change the settings required for the connection.
OR
ì Select a saved profile.
Then the connection will be set up automatically.