Displaying switch hardware/software versions, Displaying switch hardware/software versions -15, Field attributes – SMC Networks SMC Tiger 10/100 SMC6128L2 User Manual
Page 69

B
ASIC
C
ONFIGURATION
3-15
CLI – Specify the hostname, location and contact information.
Displaying Switch Hardware/Software Versions
Use the Switch Information page to display hardware/firmware version
numbers for the main board and management software, as well as the
power status of the system.
Field Attributes
Main Board
•
Serial Number – The serial number of the switch.
•
Number of Ports – Number of built-in RJ-45 ports and expansion
ports.
•
Hardware Version – Hardware version of the main board.
Console(config)#hostname R&D 5
Console(config)#snmp-server location WC 9
Console(config)#snmp-server contact Geoff
Console(config)#exit
Console#show system
System Description: SMC Networks SMC6128L2
System OID String: 1.3.6.1.4.1.259.6.10.94
System Information
System Up Time: 0 days, 0 hours, 7 minutes, and 22.65
seconds
System Name: R&D 5
System Location: WC 9
System Contact: Geoff
MAC Address (Unit1): 00-00-35-28-00-03
Web Server: Enabled
Web Server Port: 80
Web Secure Server: Enabled
Web Secure Server Port: 443
Telnet Server: Enable
Telnet Server Port: 23
Jumbo Frame: Disabled
POST Result:
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Done All Pass.
Console#