Displaying port members of multicast groups, Displaying port members of multicast groups -225, Figure 3-102. mvr port information -225 – SMC Networks SMC Tiger 10/100 SMC6128L2 User Manual
Page 279: Vlan r
M
ULTICAST
VLAN R
EGISTRATION
3-225
multicast traffic from one of the MVR groups, or a multicast group has
been statically assigned to an interface.
•
Immediate Leave – Shows if immediate leave is enabled or disabled.
•
Trunk Member – Shows if port is a trunk member (Port Information
only).
Web – Click MVR, Port or Trunk Information.
Figure 3-102. MVR Port Information
CLI – This example shows information about interfaces attached to the
MVR VLAN.
Displaying Port Members of Multicast Groups
You can display the multicast groups assigned to the MVR VLAN either
through IGMP snooping or static configuration.
Field Attributes
•
Group IP – Multicast groups assigned to the MVR VLAN.
Console#show mvr interface
Port Type Status Immediate Leave
------- -------- ------------- ---------------
eth1/1 SOURCE ACTIVE/UP Disable
eth1/2 RECEIVER ACTIVE/UP Disable
Console#