SMC Networks SMC Tiger 10/100 SMC6128L2 - Manual (Page 436)

C
OMMAND
L
INE
I
NTERFACE
4-136
Command Mode
Global Configuration
Command Usage
• Views are used in the snmp-server group command to restrict user
access to specified portions of the MIB tree.
• The predefined view “defaultview” includes access to the entire MIB
tree.
Examples
This view includes MIB-2.
This view includes the MIB-2 interfaces table, ifDescr. The wild card is
used to select all the index values in this table.
This view includes the MIB-2 interfaces table, and the mask selects all
index entries.
show snmp view
This command shows information on the SNMP views.
Command Mode
Privileged Exec
Console(config)#snmp-server view mib-2 1.3.6.1.2.1 included
Console(config)#
Console(config)#snmp-server view ifEntry.2 1.3.6.1.2.1.2.2.1.*.2
included
Console(config)#
Console(config)#snmp-server view ifEntry.a 1.3.6.1.2.1.2.2.1.1.*
included
Console(config)#