SMC Networks SMC Tiger 10/100 SMC6128L2 - Manual (Page 264)

C
ONFIGURING THE
S
WITCH
3-210
Enabling IGMP Filter Status
You can enable the IGMP filter status and set the IGMP profile
configuration.
Command Attributes
• IGMP Filter — When enabled, the switch will filter network traffic/
(Default: Disabled)
• Current — Displays the list of current IGMP profiles.
• New — Add an IGMP profile. (Range: 1-4294967295)
Web – Click IGMP Snooping, IGMP Filter Configuration.
Figure 3-93. Enabling IGMP Filter
Enabling IGMP Immediate Leave
The IGMP snooping immediate-leave feature enables a Layer 2 LAN
interface to be removed from the multicast forwarding table without first
sending an IGMP group-specific query to the interface. Upon receiving a
group-specific IGMPv2 leave message, the switch immediately removes
the interface from the Layer 2 forwarding table entry for that multicast
group, unless a multicast router was learned on the port.