SMC Networks SMC Tiger 10/100 SMC6128L2 - Manual (Page 380)

C
OMMAND
L
INE
I
NTERFACE
4-80
show system
This command displays system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to
“Displaying System Information” on page 3-13.
• The POST results should all display “PASS.” If any POST test
indicates “FAIL,” contact your distributor for assistance.
Example
Console#show system
System description: SMC Networks SMC6128L2
System OID string: 1.3.6.1.4.1.259.6.10.94
System Information
System Up Time: 0 days, 0 hours, 7 minutes, and 22.65
seconds
System Name: [NONE]
System Location: [NONE]
System Contact: [NONE]
MAC Address (Unit1): 00-00-35-28-00-03
Web Server: Enabled
Web Server Port: 80
Web Secure Server: Enabled
Web Secure Server Port: 443
Telnet Server: Enable
Telnet Server Port: 23
Jumbo Frame: Disabled
POST Result:
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Done All Pass.
Console#