Spanning-tree, Spanning-tree -181, 181 spanning-tree – SMC Networks SMC Tiger 10/100 SMC6128L2 User Manual
Page 481

S
PANNING
T
REE
C
OMMANDS
4-181
spanning-tree
This command enables the Spanning Tree Algorithm globally for the switch. Use
the no form to disable it.
Syntax
[no] spanning-tree
Default Setting
Spanning tree is enabled.
Command Mode
Global Configuration
Command Usage
The Spanning Tree Algorithm (STA) can be used to detect and disable
network loops, and to provide backup links between switches, bridges
or routers. This allows the switch to interact with other bridging
devices (that is, an STA-compliant switch, bridge or router) in your
spanning-tree
spanning-disabled
Disables spanning tree for an interface IC
spanning-tree cost
Configures the spanning tree path cost
of an interface
IC
spanning-tree
port-priority
Configures the spanning tree priority of
an interface
IC
spanning-tree edge-port Enables fast forwarding for edge ports IC
spanning-tree portfast
Sets an interface to fast forwarding
IC
spanning-tree link-type
Configures the link type for RSTP
IC
spanning-tree
protocol-migration
Re-checks the appropriate BPDU
format
PE
show spanning-tree
Shows spanning tree configuration for
the common spanning tree (i.e., overall
bridge), or a selected interface.
PE
Table 4-53 Spanning Tree Commands (Continued)
Command
Function
Mode Page