Siemens 300 H - Manual (Page 79)

Making multi-line and team calls
79 79 79 79
Step by Step
Having the number of the called station
displayed
If the number of the station for which you (as a member
of a call pickup group) wish to pick up a call does not ap-
pear on the display, you can enter the code for "Display
on request" after lifting the handset. If you are not sure
of this code, enquire with System Support:
Q
Lift the handset.
After the code has been entered, the station number of
the telephone which has been called is displayed.
Taking a call in a hunt group
All the members of the team can be accessed simulta-
neously by way of a hunt group number.
Your telephone rings.
Q
Lift the handset.
Removing station from hunt group/
adding station to hunt group
Precondition: A hunt group has been configured in the
team.
You can disconnect yourself from the hunt group at any
time, e.g. when you leave the office. You can rejoin the
hunt group as soon as you return to the office.
Press the key. The lamp lights up.
IK
Enter the service code.
or
Select and confirm.
Select and confirm.
and
Enter the code!
You can still be contacted via your own number
when you have been disconnected from the hunt
group.
Service Menu
Switches?
Hunting group?