Siemens 300 H - Manual (Page 65)

Relocating with the telephone
65 65 65 65
Step by Step
Relocating with the telephone
Enquire with System Support whether this is possible
with your telephone system.
After consulting with System Support, you can de-
register your telephone from its present station line and
then re-register it at the new station line. Note that the
settings on your telephone (programmed keys) are not
affected by the move.
Disconnecting the telephone from its
present station line
S
Enter the code for de-registration. If you are not sure of
the code, enquire with System Support.
S
Enter PIN.
Remove the telephone plug from the socket.
Reconnecting the telephone at the
new station line
Insert the the telephone plug in the socket.
S
Enter the code for registration. If you are not sure of the
code, enquire with System Support.
S
Enter PIN.
Multi-line and team functions
Enter the code!
Enter the code!
If you relocate with both a first and a second tele-
phone (e.g. executive/secretary configuration),
you must first de-register the second telephone,
then the first telephone. At the new location, you
log on the first telephone first, then the second
telephone.