Siemens 300 H - Manual (Page 38)

Step by Step
If you don’t get through...
38 38 38 38
If you don’t get through...
Using the callback facility
If the telephone which you have called is busy or there
is no answer, you can place a request for callback. This
also applies to external calls via ISDN switching centres.
This saves you having to dial the number repeatedly.
You are then called back
•
as soon as the other party terminates his call
• as soon as the other party makes a further call
• as soon as the other party checks his mailbox and
responds to your callback request (
Æ page 16).
Storing a callback request
Precondition: The internal called party is busy or there
is no answer.
Confirm.
or
Select and confirm (if the other party has programmed
call forwarding, you will be called back from the call
forwarding destination).
Answering a callback request
Precondition: A callback request has been stored.
The telephone rings. The "Cancel callback" message in-
forms you that this is a callback.
Q
Lift the handset. You hear ringing tone.
or Press the key. The lamp lights up. You hear ringing tone.
You are in the handsfree conversing/open listening
mode.
Rejecting a callback request
The telephone rings. The "Cancel callback" message in-
forms you that this is a callback.
Confirm.
or Let the telephone ring four times; do not answer the
call.
Callback?
Callback?
Speaker
Cancel callback?