Siemens 300 H - Manual (Page 57)

Forwarding calls
57 57 57 57
Step by Step
Deactivating variable forwarding in the idle menu
You can also deactivate the following variable forward-
ing types in the idle menu:
•
Variable forwarding
• Forwarding for internal and for external
Select and confirm while the phone is idle. Forwarding
is deactivated and the forwarding destination is deleted.
Activating and deactivating forwarding using
switch
If a forwarding destination has been programmed for
fixed forwarding, you can use the switch to activate and
deactivate the forwarding facility. If variable forwarding
is activated, it can only be deactivated with the switch.
Press the key. The lamp lights up.
Select and confirm.
Select and confirm.
Confirm.
or
Confirm. This deletes any destination number pro-
grammed for variable forwarding.
Automatic call forwarding
Forwarding of internal and external calls in the system
can be configured and activated for your line by System
Support. Calls can be rerouted:
• unconditionally
• when the line is busy
• when the call is not answered
Unconditional call forwarding should only be used if the
line is for outgoing calls only (for example, on an eleva-
tor).
If you have set up fixed or variable call forwarding, and
if the manually programmed forwarding destinations
are not obtainable (for example, because they are busy),
then calls are automatically forwarded to the system for-
warding destinations.
Call forwarding off?
Service Menu
Switches?
Call forwarding?
Activate?
Deactivate?