Samsung GH46-00842A User Manual

Page 155

Mobile Web 151

• Password: enter the user password required to connect to the

network.

• Protocol: set the connection protocol used by the WAP browser:

WAP or HTTP.

• Home URL: enter the URL address of the page to be used as your

homepage.

• Gateway Address: (WAP only) enter the gateway address of the

proxy server.

• Proxy Address: (HTTP only) set the proxy server address and port.

• Secure Connection: (WAP only) determines if the connection will

follow a secure protocol.

• Linger Time (sec.): set a time period (in seconds) after which the

network is disconnected if there has been no new data traffic in that
time.

• Advanced Settings: (touch

) allows you to configure some of

the IP-specific information: Static IP, Static DNS, Server information,
and Traffic Class.

–

Static IP: specify if you want to manually enter an IP address. If you
want the IP address to be automatically assigned by the server, remove
the check mark.

–

Local Phone IP: enter the IP address obtained from the network
operator, if you checked the Static IP option.

–

Static DNS: specify if you want to manually enter the Domain Name
Server (DNS) address. If you want the address to be automatically
assigned by the server, remove the check mark.

–

Server 1/Server 2: enter the Domain Name Server (DNS) addresses.

–

Traffic Class: select the traffic class.

Touch

to exit Advanced Settings.

Touch

to save these settings.

The WAP settings may vary depending on the service provider.