P.72 “program—storing your, Print settings in memory, Program—storing your print settings in memory – Savin 5450 User Manual
Page 92: Storing your settings, P.72 “program—storing your print, Settings in memory
OPERATION
72
1
Program—Storing Your Print Settings In
Memory
You can store up to 9 frequently used
print job settings in machine memory
and recall them for future use.
Note
❒ The stored programs are not
cleared when you turn off the main
switch.
❒ The stored programs cannot be de-
leted. If you want to change a
stored program, overwrite it.
Storing Your Settings
A
Set the print settings you want to
put into memory.
B
Press the
{{{{
Program
}}}} key.
C
Select
[Store]
with the
[
→
→
→
→
]
or
{{{{}
}
}
}}}}}
key.
D
Press the
[OK]
key.
Note
❒ The program numbers (1 to 9)
will be displayed in the panel
display.
❒ If a user program has been pro-
tected, that program number
will not appear in the display.
To change a protected user pro-
gram, see
❒ If all the user programs have
been protected, you cannot
store any settings. Press the
[Cancel]
key.
E
Select the program number you
want to store the settings in with
the
[
←
←
←
←
]
,
[
→
→
→
→
]
,
{{{{~
~
~
~}}}}, or {{{{}
}
}
}}}}} key.
Note
❒ You can also select the program
number with the Number keys.
F
Press the
[OK]
key.
Note
❒ If this program number is al-
ready used, the machine asks
whether you wish to overwrite
it or not. Press the
[Yes]
or
[No]
key.
Program
Clear Modes
Auto Cycle
Proof
Enter
Start
Clear/Stop
TPES190N
TPES570E
TPES530E