Savin 5450 - Manual (Page 51)

Preset Reduce/Enlarge—Reducing And Enlarging Using Preset Ratios
31
1
A
Press the [Ratio] key.
B
Select the desired ratio with the
[
← ← ← ←
] , [
→ → → →
] ,
{{{{~ ~ ~ ~}}}}, or {{{{} } } }}}}} key.
C
Press the [OK] key.
D
Make sure that the original and
the print paper are the correct
size.
E
Set your original on the exposure
glass (contact glass) or in the op-
tional document feeder.
F
Press the
{{{{
Start
}}}} key.
G
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
=
] key (see
⇒
P.25 “Adjusting
Print Image Position”).
H
Make your prints.
TPES570E
TPES530E
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES050N