Savin 5450 - Manual (Page 77)

Manual Class Mode With One Original—Making Variable Numbers Of Prints From The Same Original
57
1
E
Press the
{{{{
Enter
}}}} key.
F
Enter the desired number of
prints for the second set with the
Number keys.
G
Press the
{{{{
Enter
}}}} key.
Note
❒ Repeat steps F and G for each
set.
❒ The maximum number of sets
that can be made is 20.
H
Press the [OK] key.
I
Set one original on the exposure
glass (contact glass) or in the op-
tional document feeder.
J
Press the
{{{{
Start
}}}} key.
K
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
=
] key (see
⇒
P.25 “Adjusting
Print Image Position”.)
L
Make your prints.
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES020N
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES040N
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES050N