Savin 5450 - Manual (Page 58)

OPERATION
38
1
F
Enter the vertical and horizontal
ratio.
Note
❒ To change the value entered,
press the {
Clear/Stop
} key and
enter the new value.
Adjusting ratios with the [
← ← ← ←
],
[
→ → → →
],
{~}
, or
{}}
key
A Adjust the vertical ratio with
the [
← ← ← ←
] , [
→ → → →
] ,
{{{{~ ~ ~ ~}}}}, or {{{{} } } }}}}} key.
B Press the {{{{{ { { {}}}} key.
C Adjust the horizontal ratio
with the [
← ← ← ←
] , [
→ → → →
] ,
{{{{~ ~ ~ ~}}}}, or {{{{} } } }}}}}
key.
Entering the ratios with the
number keys
A Enter the vertical ratio with the
Number keys.
B Press the {{{{
Enter
}}}} key.
C Enter the horizontal ratio with
the Number keys.
D Press the {{{{
Enter
}}}} key.
G
Press the [OK] key.
H
Make sure that the original and
the print paper are the correct
size.
I
Set your original on the exposure
glass (contact glass) or in the op-
tional document feeder.
J
Press the
{{{{
Start
}}}} key.
K
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
=
] key (see
⇒
P.25 “Adjusting
Print Image Position”).
L
Make your prints.
Entering The Dimensions Of
The Original And Print Paper
A
Press the [Ratio] key.
B
Select [Mag.] with the [
→ → → →
] or
{{{{} } } }}}}}
key.
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES050N
TPES570E
TPES570E