Savin 5450 - Manual (Page 188)

What To Do If Something Goes Wrong
168
4
x Clearing Misfeeds
R
CAUTION:
Note
❒ After clearing the misfeeds, make
sure that all the doors, covers, and
units are closed and the
x indica-
tor is off.
❒ To prevent misfeeds, do not leave
any torn scraps of paper, originals,
or masters in the machine.
❒ When clearing misfeeds, do not
turn off the main switch. If you do
your print settings will be cleared.
❒ If misfeeds occur repeatedly, con-
tact your service representative.
”
x x x x
+ A” Paper Misfeed In The
Paper Feed Section
A
Remove the misfed paper.
- - - -To prevent paper misfeeds:
Check the following before restarting
the printing run.
• Did you select appropriate paper
type with the [Ppr. Type] key?
• Are the side plate pads in the cor-
rect positions?
To print on thin paper (47.1 g/m 2 ,
12.5 lb), slide the levers (behind the
paper feed side/end plates) in the
direction of the arrow (see illustra-
tion).
• When paper is curled, correct the
curl as shown.
• Be careful not to cut yourself on any sharp edges when you reach
inside the machine to remove misfed sheets of paper or masters.
TPES520E
TPEY060E
Z066