Savin 5450 - Manual (Page 109)

Color Printing Using The Optional Color Drum
89
2
A
Prepare the two originals. Set the
first original on the exposure
glass (contact glass).
B
Enter the number of prints with
the Number keys.
C
Press the
{{{{
Start
}}}} key.
D
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
=
] key (see
⇒
P.25 “Adjusting
Print Image Position”).
E
Press the
{{{{
Print
}}}} key.
F
Remove the prints from the paper
delivery tray and set them on the
paper feed tray again as shown in
the illustration.
G
Exchange the drum unit. See
⇒
P.87 “Changing The Color Drum
Unit”.
H
Set the second original and press
the
{{{{
Start
}}}} key.
I
Check the image position.
J
Press the
{{{{
Print
}}}} key.
TPEH270E
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES040N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES070N
TPEY042E
TPEH101E