Savin 5450 - Manual (Page 67)

Selecting A Mode To Match Your Original
47
1
G
Press the
{{{{
Start
}}}} key.
H
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
=
] key (see
⇒
P.25 “Adjusting
Print Image Position”).
I
Make your prints.
Pencil Mode Printing
Note
❒ Originals written in pencil should
be set on the exposure glass (con-
tact glass).
A
Press the [Original] key.
B
Select [Pencil] with the [
← ← ← ←
] or
{{{{~ ~ ~ ~}}}}
key.
C
Press the [OK] key.
D
Set your original on the exposure
glass (contact glass).
E
Press the
{{{{
Start
}}}} key.
F
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
=
] key (see
⇒
P.25 “Adjusting
Print Image Position”).
G
Make your prints.
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES050N
TPES550E
TPES550E
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES050N