Savin 5450 - Manual (Page 56)

OPERATION
36
1
Using the number keys
A Enter the ratio with the Num-
ber keys.
B Press the {{{{
Enter
}}}} key.
G
Press the [OK] key.
H
Make sure that the original and
the print paper are the correct
size.
I
Set your original on the exposure
glass (contact glass) or in the op-
tional document feeder.
J
Press the
{{{{
Start
}}}} key.
K
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
=
] key (see
⇒
P.25 “Adjusting
Print Image Position”).
L
Make your prints.
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES040N
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES020N
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES050N