Sharp SND-5080 - Manual (Page 85)

English _85
M
SETUP
SCREEN
Factory default : Resets the system to the factory default.
Except network parameter : Reset the other settings except for the interface/
port/DDNS/IP filtering settings.
All : Resets all settings including the camera settings. (however, the log
information will not be reset)
If you reset all settings, the IP address will be defaulted to 192.168.1.100.
Configuration backup & Restore : Backs up the current system settings before
performing the restoration process.
Restart : Restarts the system.
When done, click [Apply].
To perform the upgrade
Click [Upgrade].
Click [Browse] and specify a file to
upgrade.
Click [Send].
The "UPGRADE" dialog appears where
the progression will be shown in the
bottom.
If you forcibly terminate the upgrade
process, upgrade will not be completed
properly.
To save the current settings and restore the backup settings
Click [Backup].
The Save As dialog should appear.
Specify the backup path with a proper
file name, and click [Save].
The backup file will be saved to the
specified path in the format of ".bin".
To restore the backup settings, click
[Restore].
y
-
-

y
y
4.
1.
2.
3.
4.
M 
1.
2.
3.