Sharp SND-5080 - Manual (Page 46)

46_ network connection and setup
network connection and setup
IP ADDRESS SETUP
Buttons used in IP Installer
Item Description
Device Name
Model name of the connected camera.
Click the column to sort the list by model name.
However, search will be stopped if clicked during the search.
Mode
Displays either or for the current network connection
status.
MAC(Ethernet)
Address
Ethernet address for the connected camera.
Click the column to sort the list by Ethernet address.
However, search will be stopped if clicked during the search.
IP Address
IP address.
Click the column to sort the list by IP address.
However, search will be stopped if clicked during the search.
The factory default is "192.168.1.100"
Protocol
Network setting for the camera.
The factory default is "IPv4".
Cameras with the IPv6 setting will be displayed "IPv6".