Sharp SND-5080 - Manual (Page 80)

setup screen
80_ setup screen
Specify an operation that will perform if an alarm occurs.
Output duration : Specify the alarm output time in the alarm input setup.
E-mail Sending : Specify the use of email transfer in the alarm input setup.
Record : Specify the use of recording in the alarm input setup.
When done, click [Apply].
Video analysis
From the Setup menu, select the
)> tab.
Click .
Specify the use of Intelligent Video
Analysis.
Specify the use of overlay.
If you set it to Enable, the event rules
will be shown on the screen.
Specify the object size.
Select a sensitivity level at which the
camera detects the object.
Select an event rule.
You can select a total of 3 rules including the
virtual line and the specified area.
Specify the activation time and activation
condition.
For more information about and , refer to "Alarm Input".
(page 79)
Specify whether or not the alarm area is displayed.
- If you set it to , the suspect area where the alarm occurs will be marked in a
red box.
5.
y
y
y
6.
1.
2.
3.
4.
5.
6.
7.

8.

9.