Static ip setup – Sharp SND-5080 User Manual
Page 47
English _47
M
NETWORK
CONNECTION AND
SETUP
UPnP Status
This function is not currently implemented.
URL
DDNS URL address enabling access from the external Internet.
However, this will be replaced with the
DDNS registration has failed.
IPv4
Scans for cameras with the IPv4 setting.
IPv6
Scans for cameras with the IPv6 setting.
Search
Scans for cameras that are currently connected to the network.
However, this button will be grayed out if neither IPv4 nor IPv6 is checked.
Auto Set
Manual Set
You should configure the network settings manually.
Exit
Exits the IP Installer program.
STATIC IP SETUP
Manual Network Setup
Run
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.
For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not
support this function.
Select a camera in the search list.
Find the MAC (Ethernet) address
labeled on the rear of the camera.
Both the [Auto Set] and [Manual Set]
buttons will be activated.
Click [Manual Set].
The Manual Setting dialog appears.
The default values of
be displayed.
The default
M
1.
2.