Sharp SND-5080 - Manual (Page 43)

English _43
M
NETWORK
CONNECTION AND
SETUP
CONNECTING THE CAMERA DIRECTLY TO A DHCP
BASED DSL/CABLE MODEM
Use the cross LAN cable to connect the network cable directly to your PC.
Run the IP Installer and change the IP address of the camera so that you can use
the web browser on your desktop to connect to the Internet.
Use the Internet browser to connect to the camera.
Move to [Setup] page.
Move to [Network] – [DDNS] and configure the DDNS settings.
Move to [Network] – [Interface], and set the network type to [DHCP].
Connect the camera, which was removed from your PC, directly to the modem.
Restart the camera.
For registering the DDNS settings, refer to "DDNS". (page 74)
For configuring the DDNS settings, refer to "Registering with DDNS". (page 76)
For setting the network type, refer to "Interface". (page 73)
1.
2.
3.
4.
5.
6.
7.
8.
M 


www.samsungc ctv.com
SNB-5000
Camera
External Remote PC
DDNS Server
(Data Center, KOREA)
DSL/Cable
Modem
INTERNET