Sharp SND-5080 - Manual (Page 51)

English _51
M
NETWORK
CONNECTION AND
SETUP
PORT RANGE FORWARD (PORT MAPPING) SETUP
If you have installed an IP router with a camera connected, you must set the port range
forwarding on the IP router so that a remote PC can access the camera in it.
Manual Port Range Forwarding
From the Setup menu of the IP router,
select -
.
For setting the port range forward for
a third-party IP router, refer to the user
guide of that IP router.
Select and for
each connected camera to the IP
router.
Each port number for the IP router
should match that specified in
- from the camera's
Setup menu.
When done, click [Save Settings].
Your settings will be saved.
The settings may differ depending on the
connected IP router model.
For more information, refer to the user
manual of the applicable router.
1.
2.
3.
M 