Overview – Sharp SND-5080 User Manual
Page 22
overview
22_ overview
Inside
Item
Description
Alarm In / Out
terminals
ALARM IN
Used to connect the alarm input signal.
ALARM OUT
Used to connect the alarm output signal.
ALARM COM Common port where the alarm output signal is connected.
GND
Used for earth-grounding.
SD Memory Card
Compartment
Compartment for the SD memory card.
Reset Button
Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.
J
Resetting the camera requires reconfiguration of network settings (IP
address, subnet mask, gateway address etc.) using the IP Installer
software application.
3