Sharp O2 - Manual (Page 75)

Call Manager 74
Data Counter (M 6-2-7)
You can confirm the amount of bytes which you used
in the GPRS transmission.
1. Press
to display the Main Menu.
2. Press or to select “Call Manager”, then press
.
3. Press or to select “Call Register”, then press
.
4. Press or to select “Data Counter”, then press
.
5. Press or to select “Last Data” or “All Data”,
then press .
You can now check the amount of bytes.
6. When you have finished, press [Back].
Resetting All Data Counter
1. Perform steps 1 to 4 in “Data Counter”.
2. Press
or to select “Clear Counter”, then press
.
3. Press or to select “Yes”, then press .
The Data Counter is reset to zero. To cancel
resetting, select “No” at step 3, then press
.
Diverts (M 6-3)
This service is used to divert incoming calls to your
voice mail system or to another number depending on
certain conditions in which you cannot answer a call.
Divert Calls
1. Press
to display the Main Menu.
2. Press or to select “Call Manager”,
then press .
3. Press or to select “Diverts”, then press
.
4. Select one of the divert options by pressing or
, then press .
The divert options available are:
• “All Calls”:
Diverts all voice calls without
ringing.
• “When Busy”: Diverts incoming calls when you are
on a call.
• “No Answer”: Diverts incoming calls if you do
not answer a call within a certain
period of time.
• “Not Reachable”: Diverts incoming calls when
your phone is out of network
service or switched off.
5. Select “On”, then press .