Sharp O2 - Manual (Page 68)

67 Organiser
8. Enter the alarm time using the digit keys, then press
.
When you enter the alarm time in a 12-hour clock
format, press
and change am/pm.
9. Press or to select “Repeat Daily”, then press
.
10.Press or to select “On” or “Off”, then press
.
11.Press or to select “Alarm Status”, then press
.
12.Press or to select “On”, then press .
To Change the Type of Alarm Tone
1. Perform steps 1 to 6 in “Setting Alarm” on page 66.
2. Press
or to select “Alarm Tone”, then press
.
3. Select “Melody”, then press .
4. Press or to select “Preset Melody” or
“Sound Gallery”, then press .
5. Select the alarm tone.
If you wish to hear the demo play, press
[Play].
To stop playing, press
[Stop].
6. When selection is complete, press .
To Change the Vibration of Alarm
1. Perform steps 1 to 6 in “Setting Alarm” on page 66.
2. Press
or to select “Alarm Tone”, then press
.
3. Press or to select “Vibration”, then press
.
4. Press or to select “Enable”, “Disable” or
“Link to Sound”, then press .
To Change the Duration of Alarm
1. Perform steps 1 to 10 in “Setting Alarm” on
page 66.
2. Press or to select “Alarm Tone”, then press
.
3. Press or to select “Duration”, then press
.
The current duration is displayed.
4. Enter the length of the duration in 2 digits (02 to 59
seconds) using the digit keys, then press .